Review of Best Glue For Inflatables
Top Pick
1. SEA DOG WATER SPORTS Tubes of Repair PVC Glue for …
- Brand: SEA DOG WATER SPORTS
- Manufacturer: SEA DOG WATER SPORTS
- Color: 6 X 30G
Features
- YOU CAN REPAIR BOATS, SEATS AND ALL OTHER INFLATABLE STUFF! CAN ALSO BE USED ON WATER TOYS ETC.
- 6 X 30G NFLATABLE BOAT REPAIR GLUE
Best Quality
2. Scotty #341-BK Glue-On Pad For Inflatable Boats (Black)
- Brand: Scotty
- Manufacturer: Scotty
- Color: Black
- Dimensions: Height: 1.0 Inches Width: 7.0 Inches Length: 11.0 Inches Weight: 0.25 Pounds `
Features
- Size: 5″w x 7″h
- Includes all stainless steel fasteners
- Black in color
- Size: 5″w x 7″h
Recommended
3. 1-Piece Waterproof Vinyl Repair Glue – for Stand-Up SUP Paddle-Boards …
- Brand: DANA TRADING
- Manufacturer: Dana Trading
- Dimensions: Height: 5.0 Inches Width: 5.0 Inches Length: 5.0 Inches
Features
- WORKS WITH SereneLife SUP PADDLEBOARDS: The SereneLife Waterproof Vinyl Repair Glue features universal application for SereneLife Stand-Up SUP paddle-boards including SLSUPB06, SLSUPB08, SLSUPB10, SLSUPB20, SLSUPB105, SLSUPB125, SLSUPB135 & SLSUPB145
- UNIVERSAL APPLICATION: The repair glue also works with other water inflatables and with repairing poolside toys and safety inflatables
- WATERPROOF: The vinyl repair kit features a waterproof and weather-resistant vinyl setting. It also has greater damage resistance maintaining the good condition of your paddleboard
- EASY TO USE: Apply to clean, smooth and dry surfaces to maximize the glue’s binding effect. Apply a layer that reliably covers the damage. Allow time to repair, after 2-4 hours your gear is ready to use. Maximum strength is acquired within 24 hours
- WORRY-FREE SHOPPING: With the SereneLife PRTSLSUPBGLUE Waterproof Vinyl Repair Glue we are confident of the quality of our product
4. Seamax Commercial Grade 2 Part Marine Adhesive for All PVC …
- Brand: Seamax
- Manufacturer: Seamax Marine
Features
- Mix 5% hardener (treatment) to the glue before use. Maximum add 10% hardener when in Cold Weather 10C-15C or High Humidity 50-75%. Do NOT exceed a mixture of 10% to the glue. M.E.K. is the thinner for PVC glue. If the glue hardens, you can add up to 10% MEK to the glue to reactivate the glue. Glue mixed with hardener can be kept for up to 6 hours.
- Use a small painting brush to apply 1-3 layer(s) glue on both material surfaces. Wait 5 minutes between applications to allow glue to dry and then attach the two pieces of material together. Once you have applied the patch, work from the center out with something like a teaspoon to force out any air bubbles and then apply pressure to the repaired area for at least 24 hours. Wait 48 hours for the glue to cure before using.
- PVC Glue can be used as one part. For a better result, please do 2 Part glue (glue and hardener) to ensure the overall quality of the repair and extend the life time of the bonding. For any repairs related to air leaks, please use 2 Part Glue. Glue and hardener sealed in the bottles can be kept up to 3 years
- Instruction of Glue Layer applied: 1-2 layers on new fabric surface; 2-3 layers on old fabric surface; 3-4 layers for wood or plywood surface; 2-3 layers for parts or aluminum surface. (The fabric of Hypalon boat, it must has a coating layer on the fabric, sanding the boat fabric to get rid of this coating is a must before gluing.)
- Only mix the amount of glue you require for the repair. Seal the bottle right away and store it in a cool area so that it may be used again. If the hardener turns to crystals or gets sticky, it is no longer usable. To clean the area that needs to be repaired, use Methyl Hydrate, Acetone or MEK.
5. YYST 4 X Stainless Steel D-Ring Pad/Patch for PVC Inflatable …
- Brand: YYST
- Manufacturer: Yi Ya Su
- Color: Gray
- Dimensions: Height: 1.3 Inches Width: 3.9 Inches Length: 4.1 Inches Weight: 0.15 Pounds `
Features
- Quantity:4 pieces Color: Gray. No glue. Instruction included.
- For PVC Inflatable Boat Raft Dinghy Kayak.
- Diameter of Patch : 11 cm（4.25 inch） Out – Diameter of Stainless Steel D-ring : 38 MM（1.5 inch） Inner – Diameter of Stainless Steel D-ring : 32 MM（1.25 inch）
- Made of PVC and stainless steel 304.
- Instruction Included. No Glue. No glue for you . No glue on the back fo the d ring patch.
6. Pool Above Repair Kit for Inflatable Furniture | Vinyl Glue …
- Brand: Pool Above
- Manufacturer: Pool Above
- Dimensions: Height: 2.0 Inches Width: 6.0 Inches Weight: 0.18 Pounds `
Features
- Heavy duty clear vinyl patches
- Works for pool liners as well as inflatable pools, rafts, and air mattresses
- Four 2.625” round patches
- 1 fl oz (30ml) tube of vinyl cement
- Works under water
7. Seamax Bimini Top Pontoon Fitting Kit for Inflatable Boat, Patch …
- Brand: Seamax
- Manufacturer: Seamax Marine
Features
- Traditional Bimini Top sellers had no good solution for Inflatable Boats, they are either weak to support or hard to install. Seamax developed this special Bimini Pontoon Fitting Kit for all inflatable boats.
- The patch has the curve interface to attach on the pontoon; it is also built-in a strong stainless bracket to support the Bimini weight up to 100Lbs and 30 knots wind speed. Fitting can turn 180 degree wide angle, it has no limitation to install it at any position. Its design and quality had been recognized as the best solution by Zodiac dealers.
- This package also comes with stainless steel hardware, including bolts, lock pins and wind nuts. You can choose different hardware for your Bimini top as temporary or permanent installation solution.
- We have the PVC package and Hypalon package with glue sealed in an aluminum bottle. If your boat is made by TPU (Polyurethane), please choice the PVC version.
- Product had been tested for a few years from now. Now inflatable boat owner can have great solution for boat Bimini if purchase this kit.
8. 1x 30g 1.05 OZ Inflatable Boat Tube Repairing Glue Accessories …
- Brand: AquRa
- Manufacturer: AQURA
Features
- Inflatable Boat Tube Repair PVC glue
- Give excellent adhesion to both plasticised and unplasticised PVC
- Can also used on water toys
- 1 x 30g repair glue
- PVC boat Glue
9. Brocraft Glue On Boat Rod Holder for Ribs Kayak & …
- Brand: Brocraft
- Manufacturer: Brocraft
- Dimensions: Weight: 1.39 Pounds `
Features
- Glue on Rod holder for ribs. Comes complete with glue on fitting.
- Deck mount and rod holder fits permanently and securely to any inflatable using marine glue (GLUE NOT SUPPLIED))
- Adjustable to multiple vertical or horizontal positions
- Fiber-glass Injected Nylon construction,360 dergee adjustable rotation , ALOCK rod secure Rig
- please heated them up with a heat gun(or blow dryer) , to get them pliable and then glue them down
10. RAILBLAZA RIBPORT Inflatable Boat Dinghy Glue on Mount for Inflatable …
- Brand: RAILBLAZA
- Manufacturer: RAILBLAZA
Features