How to Make a Butterfly Out of a Dollar Bill

How many times have you seen a dollar bill and wondered what you could do with it other than spend it? Well, here’s a fun and easy way to turn that dollar into something special – a butterfly! All you need is the dollar bill, a pair of scissors, and some tape or glue.

First, start by folding the dollar bill in half length-wise. Then, fold the top corners down to meet in the middle so that it resembles a triangle. Next, fold each side of the triangle in towards the center line.

Now you should have a smaller triangle shape. Next, take the top layer of the small triangle and fold it down towards the bottom point. Repeat this step with the other side.

Once both sides are folded down, your butterfly shape should start to take form. To finish things off, add some tape or glue to secure the wings in place. And that’s it!

  • Begin by folding the dollar bill in half lengthwise
  • Next, fold each side of the bill up to meet in the center crease
  • Flip the bill over and make a small fold at the top and bottom of the bill
  • Now, begin accordion folding the entire bill from top to bottom
  • Make sure each fold is about a quarter inch wide
  • 5 Once you have reached the end of the bill, tuck one side of the folds into the other to create a three dimensional shape
  • 6 For the final touch, add antennas made out of pipe cleaners or thin wire!

My MONEY BOOKMARK "BUTTERFLY" | Easy Dollar Origami | Tutorial DIY by NProkuda

How to Make a Heart Out of a Dollar

Making a heart out of a dollar is really quite simple. All you need is a dollar bill and a sharpie or pen. First, fold the dollar bill in half length-wise.

Then, take the top two corners and fold them inward so they meet in the middle. Next, fold the bottom up to meet the top in the middle. Now you should have a triangle shape.

Take the left and right sides of the triangle and fold them inward so they meet in the middle again. Finally, flip your dollar over and you will have an adorable little heart!

Dollar Bill Origami Easy

Dollar bill origami is a great way to make unique gifts or to simply impress your friends. While it may seem daunting at first, once you get the hang of it, dollar bill origami is actually quite easy. All you need is a sharp knife, a steady hand, and of course, a dollar bill.

There are many different designs that you can create with dollar bill origami. Some of the most popular include flowers, hearts, and animals. No matter what design you choose, the steps are basically the same.

First, start by folding your dollar bill in half lengthwise. Then, fold it in half again so that you have a smaller rectangle. Next, take one end of the rectangle and fold it up towards the center so that it forms a triangle.

Repeat this step with the other end of the rectangle. At this point, you should have two triangles side by side. Take one triangle and fold it over onto the other so that they form a sort of pocket shape.

Once again, fold each end of this pocket up towards the center to form two more triangles. Now all four corners should be pointing upwards. To finish off your flower Origami Dollar Bill design , simply tuck each corner into the pocket formed by the other triangle .

For extra security , you can use a bit of glue or tape to keep everything in place . And there you have it – your very own Origami Dollar Bill Flower !

Dollar Bill Origami Animals

If you’re looking for a fun and unique way to spend your next dollar, why not try some dollar bill origami? Dollar bill origami is the art of folding paper money into shapes, usually animals. One popular dollar bill origami animal is the crane.

To make a crane, start with a square piece of paper. Fold the bottom corner up to meet the top corner, then fold the resulting triangle in half. Next, fold each side towards the center so that they meet in the middle (this will be the crane’s head and neck).

Finally, flip the paper over and repeat the process on the other side. Your finished crane should look like this: Another popular dollar bill origami animal is the frog.

To make a frog, start with a rectangular piece of paper. Fold it in half lengthwise, then fold each side towards the center so that they meet in the middle (this will be the frog’s head).

Easy Ways to Fold Money for Gifts

Do you want to give a loved one a special gift, but don’t want to spend a lot of money? Folding money into creative shapes is a great way to show your thoughtfulness without breaking the bank. Here are some easy ways to fold money for gifts:

1. Money rose: This is a classic way to fold money that always looks impressive. Start by folding a bill in half lengthwise. Then, take one end and make a small loop, tucking it underneath the other side.

Continue making loops until the entire bill is used up. You can secure the rose with a bit of tape or glue if desired. 2. Money heart: This design is perfect for Valentine’s Day or any other time you want to show someone how much you care.

Simply fold a bill in half horizontally, then fold it in half again vertically. Next, take the top layer and make two small cuts along the edge to create “tabs.” Fold these tabs inward so they line up with the crease in the center of the heart, then tuck them underneath (like you would with origami).

Voila! 3. Origami envelope: Need to give cash as a gift but don’t want it to look too casual? Turn it into an origami envelope!

Start by folding a bill in half lengthwise, then unfolding it and folding each long side towards the center crease (think of folding an actual envelope). Next, fold down the top flap and tuck it inside the envelope – this will act as your closure mechanism. For extra security, you can add some tape or glue on the flap before tucking it in place.

How Do You Make a Butterfly Out of a $1 Bill?

Assuming you would like a step-by-step guide: 1. Start with a one dollar bill. If the bill is new, it will be easier to work with.

Otherwise, try to smooth out any creases as much as possible. 2. Fold the bill in half lengthwise. Unfold and then fold in half again widthwise.

You should now have four equal sections. 3. Take the top left section and fold it down to meet the bottom edge of the paper, creating a triangle shape. Repeat with the other three sections so that all four corners are folded inwards.

4a. To create the butterfly’s wings, take the top two triangles and fold them downwards so that their tips meet in the middle (this may take some adjusting). Once you are happy with their placement, unfold slightly and make small folds at the edges of each wing so that they resemble actual wings (these can be as big or small as you want).

4b Alternatively, for a neater look: Make two cuts along the center line of each wing from about halfway up to where the wings join in order not to cut through completely; open up these cuts slightly; insert another dollar bill folded into fourths lengthwise behind each wing; return wings back into place.; refold center line..

This method will give your butterfly added dimensionality. 5c For an even more 3D effect: After creating your original folds per instructions 4a above AND prior to inserting additional bills behind each wing per instruction 4b above, make two small snips into each upper corner of each wing—again being careful not to cut through completely—and gently tug outward on these snipped areas until you’re satisfied with how flared out you’ve made the wings.; proceed with instruction 4b above.

. This will give your butterfly an especially dramatic look!

How Do You Make a Simple Butterfly Step by Step?

Assuming you would like a tutorial on how to make a butterfly out of paper: What You’ll Need: -2 pieces of brightly colored construction paper

-Scissors -Glue or tape -Pencil or pen

-Ruler (optional) Instructions: 1. Fold 1 piece of construction paper in half lengthwise and unfold.

This will be the butterfly’s body. 2. On the same sheet of paper, fold each side inward to meet in the center, then fold in half again. Unfold.

You should now have 4 sections. 3. On the second sheet of construction paper, draw 2 large wing shapes and cut them out. If you want, you can use a ruler to make sure the wings are symmetrical.

4. Glue or tape the wings to the body so that they overlap in the middle slightly (see photo). 5. To finish your butterfly, decorate it with whatever you like!

How Do You Make a Shape Out of a Dollar Bill?

Assuming you want to make a specific shape: 1. Cut along the dotted lines on the dollar bill. 2. Make sure not to cut into any of George Washington’s face or the words on the dollar bill.

3. Once you have cut out your desired shape, tape it onto another piece of paper or cardstock for stability.

How Do You Fold a Dollar Bill into a Rose?

If you want to fold a dollar bill into a rose, it’s actually pretty simple. All you need is a dollar bill and a bit of patience. First, take the dollar bill and fold it in half lengthwise.

Then, fold the top two corners down so they meet in the middle. Next, fold the bottom up so it meets the top in the middle. Once you have all four corners folded in, start rolling the bill from one end to create a cylinder shape.

When you get to the end, tuck the edge under so it stays together. Now for the tricky part – shaping the petals. To do this, take each side of the cylinder and pinch it towards the center.

You should now have eight petals total. Finally, give your rose a little twist at the base and voila – you’ve got yourself a beautiful (and unique) paper rose!


In this blog post, the author shows readers how to fold a dollar bill into the shape of a butterfly. The first step is to fold the bill in half lengthwise. Next, fold each end of the bill towards the center crease.

Then, fold the bill in half again horizontally. After that, open up the folds and flatten them out. Next, take one side of the bill and make a triangle shape by folding two corners towards the center.

Do the same with the other side of the bill. Finally, tuck in the wings and you have your butterfly!

Leave a Reply

Your email address will not be published. Required fields are marked *